Bell Cell Pipe

To enable MediaHint on Bell Cell Pipe Routers:

Step 1: Open your router administration page. It is usually one of the following:

• http://192.168.1.1
• http://192.168.2.1

If none of these links work, please consult your manual.

Step 2: Log into your router.

Step 3: Click on LAN settings on the left side under Lan Setup

Step 4: Select Disable in the DNS Relay field

Step 5: Fill in DNS servers with:
Primary DNS: 198.58.98.50
Secondary DNS: 23.92.29.210

Step 6: Click OK to save the settings

Step 7: Restart router
Note: Once you have completed configuration and restarted your router, you also need to restart any device on your network that you want to use with MediaHint for the router changes to take effect.
Return to My Account